XIFLON PVDF SHEETS are semi-finished products manufactured from high-performance polyvinylidene fluoride (PVDF) resin, sourced from carefully selected and trusted suppliers including XIFLON fluoropolymer resin
Excellent resistance to acids, bases, and solvents; stable in harsh chemical environments.
Service temperature from −40 °C to +120 °C; melting point 170±10 °C ensures reliability.
Tensile strength ≥ 35 MPa, elongation ≥ 25 %, and hardness ≥ 74 Shore D for durability.
High dielectric strength, low moisture uptake, and smooth, contamination-free surfaces.
Our PVDF sheets are extruded or molded from high-purity PVDF resin under strict quality control.
This guarantees smooth, contaminant-free surfaces, stable dimensions, and consistent chemical, thermal, and electrical performance across demanding applications
Precise profiles with tight tolerances and reliable fit.
Smooth, clean surfaces free from metal particles or defects.
High tensile strength, abrasion resistance, and long-term durability.
Properties validated to ASTM methods with traceable test data.
| Properties | Value | Unit | Method |
|---|---|---|---|
| Specific gravity | 1.75–1.79 | - | ASTM D792 |
| Tensile Strength at Break | ≥ 35 | MPa | ASTM D638 |
| Elongation at Break | ≥ 25 | % | ASTM D638 |
| Hardness | ≥ 74 | Shore D | ASTM D2240 |
| Melting Point | 170±10 | °C | ASTM D3418 |
| Limiting Oxygen Index | > 44 | % | ASTM D2863 |
| Diameter, mm | Thickness Tolerance | Length, mm | Length, ft. |
|---|---|---|---|
| 2.0 | 0 / +3 % | 1000×2000 / 1500×3000 | 4×8 |
| 3.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 4.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 5.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 6.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 8.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 10.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 12.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 15.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 20.0 | 1000×2000 / 1500×3000 | 4×8 |
| Diameter, mm | Thickness Tolerance | Length, mm | Length, ft. |
|---|---|---|---|
| 6.0 | 0 / +3 % | 1000×2000 / 1500×3000 | 4×8 |
| 8.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 10.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 12.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 15.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 20.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 25.0 | 1000×2000 / 1500×3000 | 4×8 | |
| 30.0 | 1000×2000 | 4×8 | |
| 35.0 | 1000×2000 | - | |
| 40.0 | 1000×2000 | - | |
| 50.0 | 1000×2000 | - |
are available upon request to meet specific application specifications. Length is supplied according to customer requirements.
This controlled extrusion/molding process delivers high-performance PVDF SHEETS with smooth, contaminant-free surfaces and stable dimensions. With strong chemical resistance, dependable mechanical strength, and reliable dielectric behavior, XIFLON PVDF sheets excel in demanding industrial environments. :contentReference[oaicite:0]{index=0}
Applications: Seals, gaskets, and valve parts for pumps and process equipment
Applications: Seals, gaskets, and valve parts for pumps and process equipment
Applications: Insulators, spacers, and dielectric components
Applications: Bushings, bearings, and custom machined parts resistant to corrosive media
Applications: High-purity precision components with smooth finishes
Applications: Hygienic seals, fittings, and machined parts for tanks and processing equipment
Xiflon PVDF SHEETS are engineered to meet stringent global safety, environmental, and industry-specific standards. Our materials are tested and certified to ensure suitability across critical sectors, including chemical processing, automotive and other industry sectors.
Extruded 2–20 mm and molded 6–50 mm thicknesses; sheet sizes 1000×2000 and 1500×3000 mm. Tolerances on L×W: 0 / +3 %.
Smooth, straight profiles with clean surfaces, free of inclusions or metal particles, produced under strict quality control.
Service range −40 °C to +120 °C; melting point 170 ± 10 °C; reliable chemical, mechanical and dielectric behavior.
Ideal for gaskets, seals, tank linings, pump parts, insulators and structural components across chemical, water-treatment and electrical uses.
Extruded: 2–20 mm • Molded: 6–50 mm; standard plates 1000×2000 / 1500×3000 mm.
High limiting oxygen index: LOI > 44 %; dimensional and surface stability for long-term service.
Typical values: tensile ≥ 35 MPa, elongation ≥ 25 %, hardness ≥ 74 Shore D (ASTM methods).
Length/width tolerance 0 / +3 %; custom cuts available from standard sheets to meet project needs.
Access our PVDF sheet dimensions and technical documentation.
Download PVDF Sheets TDSPVDF sheets are semi-finished products made from polyvinylidene fluoride (PVDF), a high-performance thermoplastic fluoropolymer. They share traits with PTFE, FEP, and PFA — such as chemical resistance, weatherability, and dielectric strength — but also provide unique benefits.
Key advantages of PVDF over other fluoropolymer sheets:
In short: PVDF sheets balance chemical durability, strength, and weatherability — an ideal choice when PTFE or PFA may be over-engineered and costly.
PVDF sheets are available in a wide range of thicknesses, formats, and finishes to suit different applications.
Thickness range:
Standard sheet sizes:
Surface finish options:
Custom supply formats:
Whether you need thin films, thick molded plates, or custom-colored sheets — PVDF can be tailored to your requirements.
PVDF sheets are valued for their chemical resistance, mechanical toughness, and outdoor durability, making them suitable across multiple sectors.
Key industries & uses:
PVDF sheets excel where chemical resistance, hygiene, and long-term weatherability are critical.
Each fluoropolymer sheet has its strengths. PVDF stands out for its mechanical toughness and cost-effectiveness.
PVDF vs. PTFE:
PVDF vs. PFA:
PVDF vs. ETFE:
Summary guide:
One of PVDF’s greatest advantages is its ease of fabrication, unlike PTFE which is difficult to weld or bond.
Fabrication methods:
Customization options:
Fabrication applications:
With its weldability, machinability, and versatility, PVDF is one of the most adaptable fluoropolymer sheet materials available.
